| Paginate products |
 |
Vertical Threaded
Vertical Threaded roof outlets are available in either LM6 Aluminum Silicon casting allow to BS1490:1970 for most roof finishes or in leaded gunmetal bo Bs1400:1985 for use with lead or copper-clad roofs for connection to copper pipework.
More Info
|
|
 |
Vertical Spigot
Vertical Spigot roof outlets are available in either LM6 Aluminum Silicon casting alloy to BS 1490:1970 for most roof finishes or in leaded gunmetal to BS 1400:1985 for use with lead or copper-clad roofs or for connection to copper pipework.
More Info
|
|
 |
Balcony Outlet
Balcony Spigot roof outlets are designed to allow the unit to be installed against a wall/upstand and the grating, which can be cut to site or prior to delivery, will allow various sizes of pipework to drain into the outlet from upper levels to give a continuous drainage line form top to bottom storey.
More Info
|
|
 |
Two-Way Outlet
Two-Way Threaded roof outlets are designed for the use at the intersection of horizontal and vertical surfaces, i.e. a balcony and parapet wall and can be used to drain off vertically or horizontally.
More Info
|
|
 |
Kompact Balcony Outlet
Offering all the benefits of the standard Balcony Outlet, the Kompact Balcony outlet is sized to allow easier less 'destructive' installation in refurbishment as well as new balcony installations. Sizes available in 50mm and 75mm spigot sizes.
More Info
|
|
 |
Kombi Terrace Grate
The 'Kombi' Terrace grate is fro use with both sizes of circular Easitrim estension rings, where brick paviours, paving slabs etc. are detailed. The grate design allows for rotation throught 90 degrees to allow positioning to surrounding paviours/slabs.
More Info
|
|
 |
Extension Rings
Easitrim Extension Rings have been designerd for use where a single level drainage 'upside-down' warm roof system is specified. It will raise the grating by up to 110mm to allow for the height required from waterproof membrane to finished roof surface.
More Info
|
|
